ProSense - Labority solutions

Welcome at Prosense

BASi LC-4C detector package

BASi offers two electrochemical (EC) detector packages; one using the analog LC-4C Electrochemical Detector, and the other using the LC epsilon Electrochemical Detector.

BASi developed the first commercial  electrochemical detector in 1974. Since then, through research and development, BASi EC detectors offer greatly enhanced capabilities and performance. The LC-4C is an analog detector that fits right in your existing data aquisition system. If you are working in a GxP regulated environment, the LC-4C is easily validated. The package builds upon a LC-4C EC detector, EC flow cell, an injector , and a CC-5 Compartment.

Electrochemical cells are very sensitive to stray electrical currents. The CC-5 serves as a Faraday cage to shield the cell from such currents. For optimal isolation, the injection valve, the chromatography column and the EC cell are also contained within the CC-5 Compartment. An EC detector package can be used with a standard bore or microbore analytical column. Several options allow you to optimize the system to your specific application. Further, if your application changes, BASi EC detector systems have the flexibility tochange with you.


The LC-4C epsilon standard bore package contains:

  • a CC-5 compartment, containing the (optional) injector, EC flow cell and a column heater to maintain constant column temperature. Temperaturefluctuations can change the elution time from a chromatography column. The LC-22/23 ColumnTemperature Controller addresses this.


  • Cross-flow or radial-flow options
  • Amperometric control by LC epsilon
  • Microbore chromatography-compatible
  • Suitable for FIA
  • Spill tray
  • Low dispersion: couple with optical detection downstream
  • Temperature control option
  • Enclosed in Faraday cage with spill tray
  • Compatible with all BASi UniJet columns
  • The LC-4C is an analog detector specifically designed for LCEC with high current sensitivity, extensive filtering, offset and autozero. Two channels are available on the LC-4C – the detector channel, which applies a potential and measures current response, and the generator channel, which can only apply a potential. The detector channel is used in all experiments, whereas the generator channel is used only for experiments in which analyte is electrolyzed before reaching the detector electrode; for example, dual series electrode applications. If the current on both channels needs to be recorded, two LC-4C detectors can be combined.


  • Amperometric detector for thin-layer flowcells
  • Two channels - generator and detector
  • Generator - conducts redox reactions at upstream electrode
  • Detector - high current sensitivity, extensive filtering, offset, and autozero
  • Controlled from front panel
  • Multi-channel detection capability with additional LC-4C
  • Modified LC-4C available for capillary electrophoresis


quotation request

There are 0 items on your quotation request
The product "
" has been added to your quotation request.


The Netherlands
De Kreek 12
4906 BB Oosterhout
Tel: +31 (0)162 471485
Fax: +31 (0)162 471486

Aretinstraße 24
D-81545 München
Tel: +49 (0)89 21025852
Fax: +49 (0)89 21025851

This product is on stock
This product is limited on stock
This product temporarily out of stock