Prosense

ProSense - Labority solutions

Welcome at Prosense

Epsilon Eclipse

 

The Epsilon is a family of potentiostat / galvanostats that has been designed to allow the user great flexibility in choosing their particular instrument.

The most basic Epsilon EClipse™ instrument can be used for standard techniques listed above, as well as chronopotentiometry, making it ideal for the teaching lab or for materials characterization (e.g., characterization of transition metal complexes by cyclic voltammetry and controlled potential electrolysis, or of biosensors by cyclic voltammetry and constant potential amperometry). Pulse, square wave, and stripping techniques can be added by a software upgrade, and a second channel can be added by a hardware upgrade.

 

  • Potentiostat, galvanostat, and potentiometer
  • Bi-potentiostat option
  • Multiple document Windows interface
  • USB connection
  • Optically isolated circuitry for noise reduction
  • Analog filtering
  • Moving average digital smoothing
  • Positive feedback iR compensation with circuit stability testing
  • Internal dummy cells for hardware test
  • Remote control of BASi® cell stands (CGME, C-3 Cell Stand, RDE-2)
  • Multiple experimental runs
  • File subtraction
  • Multiple text data file formats, including DigiSim
  • Peak finding routines (auto and manual)
  • File overlay
  • Anson plot (Q vs. t1/2) for chronocoulometry
  • Cottrell plot (i vs. t-1/2) for chronamperometry
  • Initiate potentiostat at open circuit potential
  • 50/60 Hz selection for noise minimization
  • IUPAC or polarographic axis convention
  • Wide current range - microelectrode to small-scale electrosynthesis

 

Specifications

Potentiostat Channel 1 applied potential: Dynamic DAC: 16 bit, ±3.275 V @ 0.1 mV resolution or ±10 V @ 0.33 mV resolution
Offset DAC: 8 bit, ±2.55 V @ 10 mV resolution
Channel 2 applied potential: Dynamic DAC: 8 bit, ±2.55 V @ 10 mV resolution
Compliance voltage: ±12 V
Maximum current: 100 mA
Bandwidth: > 100 kHz
Bias current: < 1pA
Electrometer input impedance: > 1012W
(values for parameters other than applied potential are for both channels)
 
Current-to-voltage converter

Full scale sensitivity: 1 nA*, 10 nA*, 100 nA, 1 µA, 10 µA, 100 µA, 1 mA, 10 mA,100 mA, (*secondary gain used)

Secondary gain: x1, x10, and x100
ADC resolution: 16 bit
Sampling rate: 50 kHz (20 µs/conversion)
Data length: up to 64k points - fast
 

Galvanostat

Applied current: 50 pA - 50 mA
Range: ±10 V, ± 1 V
Measured potential resolution: 0.02 mV
Max leakage current: 30 pA
 

I/O

Eout (applied potential)
Iout (current to voltage output)
Ein (input connection for external applied wave form)
Cell Stand port (control of C-3 Cell Stand and CGME)
Accessories Port (control of RDE-2)
PC (USB) port
Trigger out (TTL)
 

Minimum PC requirements: Win 7 or higher
Pentium III
512 MB RAM
50 MB hard drive space available
USB port
 
Power requirements: 120 or 240 VAC, 50/60 Hz, 60 VA
 
Dimensions & weight 15.75" (40 cm) x 5.25" (13 cm) x 12.75" (32.5 cm)
17.5 lb (7.4 kg) (1 channel)

quotation request

There are 0 items on your quotation request
The product "
" has been added to your quotation request.

Contact

The Netherlands
De Kreek 12
4906 BB Oosterhout
Tel: +31 (0)162 471485
Fax: +31 (0)162 471486
info@prosense.net

Germany
Aretinstraße 24
D-81545 München
Tel: +49 (0)89 21025852
Fax: +49 (0)89 21025851
uwe.hess@prosense.net

This product is on stock
This product is limited on stock
This product temporarily out of stock