Non stirred high pressure vessels

These autoclaves are the same in design & constructions as the stirred autoclave except for they do not have stirring motor, magnetic drive coupling, stirrer shaft & impellers.

All other specifications for non-stirred autoclave is same as stirred autoclave. These can be custom built to suit your application.

Sizes : 25ml to 25Ltrs.

For MOC, working pressure, temperature, standard fittings, body& head sealing, heating, control panel, mounting & technical specifications refer metal stirred autoclaves.

For normal or electrochemical corrosion studies of chemicals, acids, liquids, water etc. on particular metal under pressure & temperature. A small desired metal rest coupon can be put inside the vessel filled with desired liquid & the system can be subjected to predefined pressure & temperature for particular time period to ascertian the effect of liquid on the metal. In electrochemical studies high temperature high pressure working, counter & reference electrodes are mounted on these autoclaves.

It can be used as a gas/ liquid storage pressure pot (for pressure higher than 1500psi, where fabricated pot is not desired) to charge liquid/ gas in the autoclave/ other pressure vessel at higher pressure.

Can be used for supercritical CO solvent extraction system upto 350 bar pressure.

Non-stirred pressure vessels can be used for Cell Disruption by nitrogen decompression which is a rapid & effective way to homogenize cells & tissues

RS600H - 6 pos. +300°C Heated & Stirred €0,00

Liners €0,00

Liquid Dosing pump €0,00

The Netherlands
Bredaseweg 108a
4902 NS Oosterhout
Tel: +31 (0)162 471485
Fax: +31 (0)162 471486
info@prosense.net

Germany
Aretinstraße 24
D-81545 München
Tel: +49 (0)89 21025852
Fax: +49 (0)89 21025851
uwe.hess@prosense.net